Municipal Election 2018

Running in Hamilton: About the Money

If you're elected, you'll be responsible for co-managing billions of public dollars. Use your campaign as an opportunity to build a solid understanding and learn what it means to work with a budget.

By Cameron Kroetsch
Published November 16, 2018

This article is Part 2 in a series of reflections on Cameron Kroetsch's Ward 2 election campaign. You can also read Part 1 and Part 3.

This fairly deep dive into our campaign finances is about more than just being transparent and accountable. This article in the series, more than any other, is about helping future candidates to start off from the place our campaign ended. It's also about demonstrating that a grassroots campaign really can raise money and that smaller donations do have a tremendous impact.

As a caveat, I should say that I won't be able to provide as much detail as I'd like, as we're still putting proverbial beans into columns over here, but I hope this article gives you a clearer picture of our campaign finances.

The financial side of campaigning is probably one of the most mysterious parts for the general public to unpack. I've had a lot of people ask me what we spend all of this money on, and so I think, in part, I just want Hamiltonians to be able to see this easily. Financial reporting is usually opaquely couched in a manual document. There's no searchable database and no simple way to aggregate information or think about it outside of the prescribed format without a lot of additional work.

What our data shows is that even when it came to donations, ours was a very grassroots campaign. When I say "grassroots" in the context of the financial side of this campaign, I mean that it didn't rely mainly on donations from "interested third parties" - people who could be perceived to benefit by donating to your campaign because they have a vested interest in the outcome of a decision you might make if you're elected.

Our donations mainly came from people I have gotten to know through my community work, those we connected with through the campaign, and my friends and family.

If it's of interest, most of our donations were $100 or less (78 percent of them, to be more exact). We had about 100 individual donors to the campaign. About 5 percent of our donations came from those who could afford to donate the maximum ($1,200).

How Much We Raised and When

In total, we raised just over $18,000, which is approximately 82 percent of the allowable maximum donation amount for Ward 2 of $21,878.45 (I had originally used the wrong maximum when I reported, in my thank you letter, that we raised 95 percent of the allowable maximum - sorry for that error).

The numbers here are not final and are rounded in places. This information is being provided to give an overview, not to act as an audit itself. Here's a graph of when we raised the money for our campaign, by month, starting on May 1.

Chart: Campaign donations received by month
Chart: Campaign donations received by month

What's obvious from the graph is that people donated mostly toward the beginning and the end of the campaign (61 percent of donations). Our launch was in June, which accounted for some additional donations that month, but beyond that spike, the summer was a lull.

That was probably the biggest issue we faced in terms of budgeting for this campaign: we just weren't sure if the money would come or not. We had little room for error and had to stick to the budget and plan we came up with - all of which needed to be set in stone before September.

As is likely no surprise, there's a lot of lead time needed for ordering signs, printing and designing campaign literature, and preparing for events.

Where the Money Came From

We raised money primarily in Hamilton, but also outside the city as far west as London, in the southeast as far as St. Catharines, and in the northeast in North York. We managed to strike an interesting balance between the total donation amount from Hamilton (79 percent) and the number of donors from Hamilton (79 percent).

Here are three maps to give you a visual sense of where all of our campaign donations came from.

Map A: All donations
Map A: All donations

Map B: Hamilton donations
Map B: Hamilton donations

Map C: Ward 2 donations
Map C: Ward 2 donations

As you can tell from the maps above, most of our donations came from Ward 2 and nearly 80 percent of all donations and donors were were from Hamilton.

As someone who was running for the first time and without huge name recognition, many of the donations I received outside of the city came from my friends and family (not a huge surprise, I'm sure). For those who don't know, I've lived in Guelph and London before, grew up in the GTA, and was born and partly raised in St. Catharines.

What We Spent the Money On and Why

The best way to answer the question of what we spent our money on is with a pie chart. The pie chart details percentages and amounts based on how much we raised.

Chart: Campaign spending by category
Chart: Campaign spending by category

You might be surprised by some of these numbers. I was at first.

We could have done some things a little more cheaply, for sure. We insisted on working with local companies, especially in Ward 2, as much as possible. We also chose companies, when it was possible, with unionized employees (as we did with our signs, for instance). This definitely drove costs up in some instances.

To unpack a few things:

Something that needs to be said: I'm not rich and I couldn't afford to bankroll this campaign. I had to take time away from my full-time job and had to turn all of my focus on running in this election. This meant neglecting many important things, some of them financial.

A great example of this relates to changing my eating patterns to adjust to a new schedule. I usually eat all of my meals at home, going out occasionally. I can safely say that I never ate out as much as I did during the campaign period.

There are also all kinds of lines that have to be drawn, ethically and otherwise, when it comes to campaign expenses. It was a function of the fact that my life had changed, and that I was having to make different choices to make everything else work and to remain, frankly, put together enough to get through it all. The contingent expenses of campaigning are everywhere and nowhere and expensive.

The truth is that you can't budget with what you don't have in a municipal election. If you can, keep track of the money as it comes in and do your best to dedicate one person to this task.

We did that pretty well, which is why it wasn't very painful for me to be able to produce the information for this article and why we'll likely save money during the audit process. Being transparent and accountable almost always means being organized. Don't overlook the power of a spreadsheet, a notepad, and the time needed to check in on things periodically.

If you think you can leave it all to the end, or pay someone else to figure it all out, you'll likely find that neither is possible. Financial literacy is not only the responsibility of your campaign team, but also yours. After all, if you're elected, you'll be responsible for co-managing billions of public dollars. Use this opportunity to build a solid understanding and learn what it means to work with a budget.

Cameron Kroetsch moved to Hamilton in 2014. He's a labour relations professional, sometimes writer, and a passionate non-profit sector volunteer who cares about democracy in government and community advocacy. He lives in Corktown (Ward 2) with his partner Derek.

2 Comments

View Comments: Nested | Flat

Read Comments

[ - ]

By WallaceReese (registered) | Posted December 17, 2018 at 12:25:44

Being an electrical engineer I like to read such related posts.I got this link through a popular https://australianwritings.net/blog/tips... website online.Good to see this post.

Comment edited by WallaceReese on 2018-12-17 12:26:26

Permalink | Context

[ - ]

By saiko (registered) | Posted December 18, 2018 at 03:22:19

Saya meminjamkan Lyosha lebih banyak uang dan pergi ling 6 http://www.besibaja.id/agen-astm-a283-c.... agen astm a283 c http://www.besibaja.id/agen-pipa-boiler.... agen pipa boiler http://www.besibaja.id/agen-plat-abrex-4... agen plat abrex 400 http://www.besibaja.id/agen-plat-asme516... agen plat asme516 grade70 http://www.besibaja.id/agen-plat-astm-a2... agen plat astm a285 c http://www.besibaja.id/agen-plat-astm516... agen plat astm516 70 http://www.besibaja.id/agen-plat-boiler.... agen plat boiler http://www.besibaja.id/agen-plat-hardox.... agen plat hardox http://www.besibaja.id/agen-plat-hb-400.... agen plat hb 400 http://www.besibaja.id/agen-plat-high-st... agen plat high strenght http://www.besibaja.id/agen-plat-high-te... agen plat high tensile sm490 yb http://www.besibaja.id/agen-plat-high-te... agen plat high tensile sm490ya http://www.besibaja.id/agen-plat-kapal.h... agen plat kapal http://www.besibaja.id/agen-plat-stainle... agen plat stainless ss304 http://www.besibaja.id/agen-plat-stainle... agen plat stainless ss310 http://www.besibaja.id/agen-plat-stainle... agen plat stainless ss316 http://www.besibaja.id/agen-plat-sumihar... agen plat sumihard http://www.besibaja.id/agen-round-bar-be... agen round bar besi aisi 440s45c http://www.besibaja.id/agen-round-bar-sc... agen round bar scm440 http://www.besibaja.id/agen-steel-rail.h... agen steel rail http://www.besibaja.id/agen-steel-sheet-... agen steel sheet pile http://www.besibaja.id/distributor-astm-... distributor astm a283 c http://www.besibaja.id/distributor-pipa-... distributor pipa boiler http://www.besibaja.id/distributor-plat-... distributor plat abrex 400 http://www.besibaja.id/distributor-plat-... distributor plat asme516 grade70 http://www.besibaja.id/distributor-plat-... distributor plat astm a285 c http://www.besibaja.id/distributor-plat-... distributor plat astm516 70 http://www.besibaja.id/distributor-plat-... distributor plat boiler http://www.besibaja.id/distributor-plat-... distributor plat hb 400 http://www.besibaja.id/distributor-plat-... distributor plat high strenght http://www.besibaja.id/distributor-plat-... distributor plat high tensile sm490 yb http://www.besibaja.id/distributor-plat-... distributor plat high tensile sm490ya http://www.besibaja.id/distributor-plat-... distributor plat kapal http://www.besibaja.id/distributor-plat-... distributor plat stainless ss304 http://www.besibaja.id/distributor-plat-... distributor plat stainless ss310 http://www.besibaja.id/distributor-plat-... distributor plat stainless ss316 http://www.besibaja.id/distributor-plat-... distributor plat sumihard http://www.besibaja.id/distributor-round... distributor round bar besi aisi 440s45c http://www.besibaja.id/distributor-round... distributor round bar scm440 http://www.besibaja.id/distributor-steel... distributor steel rail http://www.besibaja.id/distributor-steel... distributor steel sheet pile http://www.besibaja.id/jual-astm-a283-c.... jual astm a283 c http://www.besibaja.id/jual-baja-h-beam.... jual baja h beam http://www.besibaja.id/jual-pipa-boiler.... jual pipa boiler http://www.besibaja.id/jual-plat-abrex-4... jual plat abrex 400 http://www.besibaja.id/jual-plat-asme516... jual plat asme516 grade70 http://www.besibaja.id/jual-plat-astm-a2... jual plat astm a285 c http://www.besibaja.id/jual-plat-astm516... jual plat astm516 70 http://www.besibaja.id/jual-plat-boiler.... jual plat boiler http://www.besibaja.id/jual-plat-hardox.... jual plat hardox http://www.besibaja.id/jual-plat-hb-400.... jual plat hb 400 http://www.besibaja.id/jual-plat-high-st... jual plat high strenght http://www.besibaja.id/jual-plat-high-te... jual plat high tensile sm490 yb http://www.besibaja.id/jual-plat-high-te... jual plat high tensile sm490ya http://www.besibaja.id/jual-plat-kapal.h... jual plat kapal http://www.besibaja.id/jual-plat-stainle... jual plat stainless ss304 http://www.besibaja.id/jual-plat-stainle... jual plat stainless ss310 http://www.besibaja.id/jual-plat-stainle... jual plat stainless ss316 http://www.besibaja.id/jual-plat-sumihar... jual plat sumihard http://www.besibaja.id/jual-round-bar-be... jual round bar besi aisi 440s45c http://www.besibaja.id/jual-round-bar-sc... jual round bar scm440 http://www.besibaja.id/jual-steel-rail.h... jual steel rail http://www.besibaja.id/jual-steel-sheet-... jual steel sheet pile http://www.besibaja.id/pabrik-astm-a283-... pabrik astm a283 c http://www.besibaja.id/pabrik-pipa-boile... pabrik pipa boiler http://www.besibaja.id/pabrik-plat-abrex... pabrik plat abrex 400 http://www.besibaja.id/pabrik-plat-asme5... pabrik plat asme516 grade70 http://www.besibaja.id/pabrik-plat-astm5... pabrik plat astm516 70 http://www.besibaja.id/pabrik-plat-boile... pabrik plat boiler http://www.besibaja.id/pabrik-plat-hb-40... pabrik plat hb 400 http://www.besibaja.id/pabrik-plat-high-... pabrik plat high tensile sm490 yb http://www.besibaja.id/pabrik-plat-high-... pabrik plat high tensile sm490ya http://www.besibaja.id/pabrik-plat-kapal... pabrik plat kapal http://www.besibaja.id/pabrik-plat-stain... pabrik plat stainless ss304 http://www.besibaja.id/pabrik-plat-stain... pabrik plat stainless ss310 http://www.besibaja.id/pabrik-round-bar-... pabrik round bar besi aisi 440s45c http://www.besibaja.id/pabrik-round-bar-... pabrik round bar scm440 http://www.besibaja.id/pabrik-steel-rail... pabrik steel rail http://www.besibaja.id/pabrik-steel-shee... pabrik steel sheet pile http://www.besibaja.id/pusat-astm-a283-c... pusat astm a283 c http://www.besibaja.id/pusat-pipa-boiler... pusat pipa boiler http://www.besibaja.id/pusat-plat-abrex-... pusat plat abrex 400 http://www.besibaja.id/pusat-plat-asme51... pusat plat asme516 grade70 http://www.besibaja.id/pusat-plat-astm-a... pusat plat astm a285 c http://www.besibaja.id/pusat-plat-astm51... pusat plat astm516 70 http://www.besibaja.id/pusat-plat-boiler... pusat plat boiler http://www.besibaja.id/pusat-plat-hardox... pusat plat hardox http://www.besibaja.id/pusat-plat-hb-400... pusat plat hb 400 http://www.besibaja.id/pusat-plat-high-s... pusat plat high strenght http://www.besibaja.id/pusat-plat-high-t... pusat plat high tensile sm490 yb http://www.besibaja.id/pusat-plat-high-t... pusat plat high tensile sm490ya http://www.besibaja.id/pusat-plat-kapal.... pusat plat kapal http://www.besibaja.id/pusat-plat-stainl... pusat plat stainless ss304 http://www.besibaja.id/pusat-plat-stainl... pusat plat stainless ss310 http://www.besibaja.id/pusat-plat-stainl... pusat plat stainless ss316 http://www.besibaja.id/pusat-plat-sumiha... pusat plat sumihard http://www.besibaja.id/pusat-round-bar-b... pusat round bar besi aisi 440s45c http://www.besibaja.id/pusat-round-bar-s... pusat round bar scm440 http://www.besibaja.id/pusat-steel-rail.... pusat steel rail http://www.besibaja.id/pusat-steel-sheet... pusat steel sheet pile http://www.besibaja.id/stockis-plat-hard... stockis plat hardox http://www.besibaja.id/stockist-plat-ast... stockist plat astm a285 c http://www.besibaja.id/stockist-plat-hig... stockist plat high strenght http://www.besibaja.id/stockist-plat-sta... stockist plat stainless ss316 http://www.besibaja.id/stockist-plat-sum... stockist plat sumihard http://www.besibaja.id/supplier-plat-har... supplier plat hardox http://www.besibaja.id/plat-stainless-ss... plat stainless ss201 http://www.besibaja.id/plat-sphc-po.html plat sphc po http://www.besibaja.id/plat-putih-spcc-s... plat putih spcc sd http://www.besibaja.id/plat-hitam-ss400.... plat hitam ss400 http://www.besibaja.id/plat-hitam-sphc.h... plat hitam sphc http://www.besibaja.id/plat-corten.html plat corten http://www.besibaja.id/plat-astm-a36.htm... plat astm a36 http://www.besibaja.id/plat-alumunium.ht... plat alumunium http://www.besibaja.id/plat-abrex-500.ht... plat abrex 500 http://www.besibaja.id/plat-abrex-450.ht... plat abrex 450 http://www.besibaja.id/plain-bar.html plain bar http://www.besibaja.id/pipa-sch80.html pipa sch80 http://www.besibaja.id/pipa-sch40.html pipa sch40 http://www.besibaja.id/pipa-sch160.html pipa sch160 http://www.besibaja.id/pipa-sch120.html pipa sch120 http://www.besibaja.id/pipa-sch10.html pipa sch10 http://www.besibaja.id/pipa-medium-galva... pipa medium galvanis http://www.besibaja.id/perforated-plate.... perforated plate http://www.besibaja.id/grating-size-galv... grating size galvanis http://www.besibaja.id/expanded-metal.ht... expanded metal http://www.besibaja.id/deformed-bar.html deformed bar http://www.besibaja.id/besi-wiremesh.htm... besi wiremesh http://www.besibaja.id/besi-unp.html besi unp http://www.besibaja.id/besi-cnp.html besi cnp http://www.besibaja.id/besi-baja-wfbeam.... besi baja wfbeam http://www.besibaja.id/baja-h-beam.html baja h beam

Permalink | Context

View Comments: Nested | Flat

Post a Comment

You must be logged in to comment.

Events Calendar

Recent Articles

Article Archives

Blog Archives

Site Tools

Feeds